• This kit allows the professional disassembling and assembling of
  all self adjusting clutches (SAC).
• The pre-tightening of the pressure plate is required in order to avoid
  clutch deformations.
• The 6-arms plate has been designed for SAC clutches with 6/8 locking holes.

• 1.) Clamping tool for 6 or 8 locking holes.
  2.) Face Spanner.
  3.) Compression Strut.
  4.) Clutch mandrel set (BMW).
  5.) Clutch resetting tool.
  6.) Handle for clamping tool.
  7.) Clutch centering tools: Centering handle / Handle adapter.
                                            Clamping cone. Centering pin.
  8.) Knurled nuts for threaded bolts (4pcs).
  9.) Three sets of 4 threaded bolts: M6 x 1.0 / M7 x 1.0 / M8 x 1.25.

• The face spanner is a releasing tool for the SAC clutches with locking
  element used on VW, Audi, Skoda, Seat.
• If the old clutch cover is to be re-used, it must first be reset.
• The adjuster ring can be turned back with clutch resetting tool.

• This kit allows the professional disassembling and assembling of
  all self adjusting clutches (SAC).
• The pre-tightening of the pressure plate is required in order to avoid
  clutch deformations.
• The 6-arms plate has been designed for SAC clutches with 6/8 locking holes.

• 1.) Clamping tool for 6 or 8 locking holes.
  2.) Face Spanner.
  3.) Compression Strut.
  4.) Clutch mandrel set (BMW).
  5.) Clutch resetting tool.
  6.) Handle for clamping tool.
  7.) Clutch centering tools: Centering handle / Handle adapter.
                                            Clamping cone. Centering pin.
  8.) Knurled nuts for threaded bolts (4pcs).
  9.) Three sets of 4 threaded bolts: M6 x 1.0 / M7 x 1.0 / M8 x 1.25.

• The face spanner is a releasing tool for the SAC clutches with locking
  element used on VW, Audi, Skoda, Seat.
• If the old clutch cover is to be re-used, it must first be reset.
• The adjuster ring can be turned back with clutch resetting tool.