• Cylinder liner puller complete with support brace.
• The counter-support brace is placed on to the cylinder block.
• The spindle of the counter-support barce is screwed into the clamping nut
  of the puller and the puller inserted into the liner.
• Wet heavy-vehicle (e.g. Mercedes-Benz, MAN) cylinder liners, automobile
  and stationary-engine liners and otehr parts may be extracted using this
  puller operation.
• Due to the newly-developed spreading system, when the spindle is turned,
  all three jaws spread quickly and without difficulty, until they are firmly seated
  beneath the edgeof the liner.
• Then the nut of the counter-support brace is tightened.
• Suitable for cylinder liner dia. 60 ~ 160mm.
• Blow Case  2sets / 17kgs / 18kgs / 1.2’

• Cylinder liner puller complete with support brace.
• The counter-support brace is placed on to the cylinder block.
• The spindle of the counter-support barce is screwed into the clamping nut
  of the puller and the puller inserted into the liner.
• Wet heavy-vehicle (e.g. Mercedes-Benz, MAN) cylinder liners, automobile
  and stationary-engine liners and otehr parts may be extracted using this
  puller operation.
• Due to the newly-developed spreading system, when the spindle is turned,
  all three jaws spread quickly and without difficulty, until they are firmly seated
  beneath the edgeof the liner.
• Then the nut of the counter-support brace is tightened.
• Suitable for cylinder liner dia. 60 ~ 160mm.
• Blow Case  2sets / 17kgs / 18kgs / 1.2’