• 1.) Uncover the bleed nipple of the caliper.
• 2.) Place the end of the hose onto the bleed nipple and secure with hose clip.
• 3.) Check that the valve unit is facing the corret way, the  direction of arrow on the unit
       should be pointing away from the caliper.
• 4.) Have a container ready to collect the brake fluid that will be flushed out of the system.
• 5.) When ready, start pumping the brake lever and topping up the fluid until all air has
        been flushed through and the fluid level is correct in the master cylinder reservoir.
• 6.) Close reservoir.
• 7.) Remove the hose from the bleed nipple, clean away any excess fluid and
       replace cover onto the nipple.
• 8.) Dispose of any excess brake fluid as per the manufacturer’s instructions.
• 9.) The valve unit and hoses should be taken apart and drained thoroughly,
       open the valve unit by unscrewing the body.

• Total Length: 17.72 in (450mm).
• Valve Length: 2.17 in (55mm).
• Tube Inner Diameter: 0.2 in (5mm).
• Tube Outer Diameter: 0.31 in (8mm).
• Sliding Card  50pcs / 9.2kgs / 10.2kgs / 2.2’

• 1.) Uncover the bleed nipple of the caliper.
• 2.) Place the end of the hose onto the bleed nipple and secure with hose clip.
• 3.) Check that the valve unit is facing the corret way, the  direction of arrow on the unit
       should be pointing away from the caliper.
• 4.) Have a container ready to collect the brake fluid that will be flushed out of the system.
• 5.) When ready, start pumping the brake lever and topping up the fluid until all air has
        been flushed through and the fluid level is correct in the master cylinder reservoir.
• 6.) Close reservoir.
• 7.) Remove the hose from the bleed nipple, clean away any excess fluid and
       replace cover onto the nipple.
• 8.) Dispose of any excess brake fluid as per the manufacturer’s instructions.
• 9.) The valve unit and hoses should be taken apart and drained thoroughly,
       open the valve unit by unscrewing the body.

• Total Length: 17.72 in (450mm).
• Valve Length: 2.17 in (55mm).
• Tube Inner Diameter: 0.2 in (5mm).
• Tube Outer Diameter: 0.31 in (8mm).
• Sliding Card  50pcs / 9.2kgs / 10.2kgs / 2.2’