• Refer to manufacturer service manual to determine model and retaining method.
• Some applications may also require move of some / all of the fasteners in the sector
   shaft cover to allow the tool to slide over the link arm.
• Back forcing screw out and slip casting over the pitman arm until the forcing screw
  lines up with the center of the sector shaft.
• Ensure that the forcing screw will not damage the threads in the end of the sector shaft.
• On some models, it may be necessary to install a bolt into the threaded end of the
  sector shaft for the pulling operation.
• Once the tool is properly positioned on the pitman arm.
• Apply 1/2”drive impact to the forcing screw until the pitman arm is removed form the
  sector shaft.
 

• Refer to manufacturer service manual to determine model and retaining method.
• Some applications may also require move of some / all of the fasteners in the sector
   shaft cover to allow the tool to slide over the link arm.
• Back forcing screw out and slip casting over the pitman arm until the forcing screw
  lines up with the center of the sector shaft.
• Ensure that the forcing screw will not damage the threads in the end of the sector shaft.
• On some models, it may be necessary to install a bolt into the threaded end of the
  sector shaft for the pulling operation.
• Once the tool is properly positioned on the pitman arm.
• Apply 1/2”drive impact to the forcing screw until the pitman arm is removed form the
  sector shaft.