• Always Keep the forcing screw threads clean and well lubricated with oil,
  failure to do so can result in the threads seizing in the tool.
• Remove the retaining nut and washer from the sector arm.
• Back out the forcing screw slip casting over the pitman arm until the forcing
  screw lines up with the center of the sector shaft.
• Once the tool is properly positioned on the pitman arm, apply 1/2” drive impact
  to the forcing screw until the pitman arm is removed from the sector shaft.
 

• Always Keep the forcing screw threads clean and well lubricated with oil,
  failure to do so can result in the threads seizing in the tool.
• Remove the retaining nut and washer from the sector arm.
• Back out the forcing screw slip casting over the pitman arm until the forcing
  screw lines up with the center of the sector shaft.
• Once the tool is properly positioned on the pitman arm, apply 1/2” drive impact
  to the forcing screw until the pitman arm is removed from the sector shaft.