•The kit supplied with adequate tools to cut the vinyl adhesive compound and urethane around windshield and auto glass. This tool kit contains following tools:---
•936-3181: 24" Weather Strip Cutting Knife. The angle of handle provides more leverage to put more power into the cut and better side-to-side control, so you can easily follow the first cut when you make your second cut. It is great for rear automobile glass.
•936-3182: 12" Weather Strip Cutting Knife. It's also ideal tool for rear automobile glass. The round handle makes knife easy to grip & provides a tremendous amount of leverage.
•936-3183: Replaceable Blade Pinchweld Scraper (3/4" wide).
•936-3184: Replaceable Blade Pinchweld Scraper (5/8" wide).
•936-3185: Replaceable Blade Pinchweld Scraper (1/2" wide).
   The handle is made of aluminum and unique design provides a protection function to avoid slip and injury when working. The blade is made of spring steel and hard enough to hold and edge, but soft enough so it will not dig into the pinchweld. It comes with a safety cover that keeps the blade sharp and prevents the user from cutting himself when the scraper is in the toolbox.
•936-3186: Wide Pinchweld Scraper. It is ideal to use across the bottom, because the razor blade scraper is too wide to use across the top or up most " A " pillars. Blade is replaceable and also comes with a safety cover.
•936-3190: 72 Feet Triangle Wire. Material: Stainless.
•936-3193: Hexagonal Head Wrench. Use to detach the windshield removal tool (936-3191).
•936-3191 Windshield Removal Tool. Cuts the vinyl adhesive compound around windshield. It is made of aluminum and unique handle design provides a protection function to avoid slip and injury when working (it is detachable).
•936-2182: 2pcs Wire Gripping Handles. Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held. 
•948-5101: Wire Feed Tool. Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield.
•936-2181: Trim Pad Remover. Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simple pry up.
•936-2132: Windshield Molding Release Tool. Use for removal of windshield molding on rubberless installation.
 

•The kit supplied with adequate tools to cut the vinyl adhesive compound and urethane around windshield and auto glass. This tool kit contains following tools:---
•936-3181: 24" Weather Strip Cutting Knife. The angle of handle provides more leverage to put more power into the cut and better side-to-side control, so you can easily follow the first cut when you make your second cut. It is great for rear automobile glass.
•936-3182: 12" Weather Strip Cutting Knife. It's also ideal tool for rear automobile glass. The round handle makes knife easy to grip & provides a tremendous amount of leverage.
•936-3183: Replaceable Blade Pinchweld Scraper (3/4" wide).
•936-3184: Replaceable Blade Pinchweld Scraper (5/8" wide).
•936-3185: Replaceable Blade Pinchweld Scraper (1/2" wide).
   The handle is made of aluminum and unique design provides a protection function to avoid slip and injury when working. The blade is made of spring steel and hard enough to hold and edge, but soft enough so it will not dig into the pinchweld. It comes with a safety cover that keeps the blade sharp and prevents the user from cutting himself when the scraper is in the toolbox.
•936-3186: Wide Pinchweld Scraper. It is ideal to use across the bottom, because the razor blade scraper is too wide to use across the top or up most " A " pillars. Blade is replaceable and also comes with a safety cover.
•936-3190: 72 Feet Triangle Wire. Material: Stainless.
•936-3193: Hexagonal Head Wrench. Use to detach the windshield removal tool (936-3191).
•936-3191 Windshield Removal Tool. Cuts the vinyl adhesive compound around windshield. It is made of aluminum and unique handle design provides a protection function to avoid slip and injury when working (it is detachable).
•936-2182: 2pcs Wire Gripping Handles. Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held. 
•948-5101: Wire Feed Tool. Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield.
•936-2181: Trim Pad Remover. Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simple pry up.
•936-2132: Windshield Molding Release Tool. Use for removal of windshield molding on rubberless installation.