Chassis & Undercar Tools
122-6022
Banding Tool For The Clamps of C.V. Joints
•Tool is easy removed, by sliding sideways after winding has been completed.
•Please band around boot and through nose of tool and through slot in winding body.
•Using a 1/2” socket wrench or by hand wind the band until sufficient tension is applied.
•Rotate handle over the boot to lock the band.
•Slide tool sideways to remove.
•Cut band to length and tap down with a hammer.
•Tool is easy removed, by sliding sideways after winding has been completed.
•Please band around boot and through nose of tool and through slot in winding body.
•Using a 1/2” socket wrench or by hand wind the band until sufficient tension is applied.
•Rotate handle over the boot to lock the band.
•Slide tool sideways to remove.
•Cut band to length and tap down with a hammer.
AUTO TOOLS CO., LTD.