PRODUCTS

Engine Repair Tools

918-1527

27pcs Glow Plug Tool Set
← →
Qty :
Add to Inquiry List
•Design for removal of damaged / broken glow plugs from cylinder heads. 
•Suitable for glow plugs with a M8-M9-M10 thread.
•Set includes all required adaptors, centering and cleaning tools to safely remove glow plug without damaging engine.
•1pc Core Drill Ø 8.1 for M9 x 1.0 thread.
•1pc Thread Tap M9 x 1.0.
•1pc Core Drill Ø 9.1 for M10 x 1.0 thread.
•1pc Thread Tap M10 x 1.0 .
•1pc Milling Cutter for glow plug electrode.
•1pc Thread Tap M8 x 1.0.
•1pc Core Drill Ø5.5 for No. 12 x 28 UNF thread.
•1pc Thread Tap No. 12 x 28 UNF.
•1pc Adapter for power drill.
•1pc Specail Drill Ø 2.6.
•1pc Cleaning Brush 5.3mm x 100mm, Overall Length: 300mm.
•1pc Cleaning Brush 9.0mm x 100mm, Overall Length: 300mm.
•1pc Cleaning Brush 10.0mm x 100mm, Overall Length: 300mm.
•2pcs Special Drill Stand.
•2pcs Tie Bolt M8 x 1.0 (180mm Long).
•1pc Glow Plug Extractor M8 x 1 (Bearing).
•1pc Puller Guide Bushing.
•1pc Puller Holder M8 x 1.0 thread.
•3pcs Glow Plug Top Remover 2.5, 3.5, 5mm.
•1pc Jaw Driver With T-Handle.
•1pc Drill Guide Bushing Ø 17.5 x 38.
•1pc Drill Guide Bushing Ø 17.5 x 63.
•1pc 1/2” Sq. Drive Adapter 10mm Hex.
 
•Design for removal of damaged / broken glow plugs from cylinder heads. 
•Suitable for glow plugs with a M8-M9-M10 thread.
•Set includes all required adaptors, centering and cleaning tools to safely remove glow plug without damaging engine.
•1pc Core Drill Ø 8.1 for M9 x 1.0 thread.
•1pc Thread Tap M9 x 1.0.
•1pc Core Drill Ø 9.1 for M10 x 1.0 thread.
•1pc Thread Tap M10 x 1.0 .
•1pc Milling Cutter for glow plug electrode.
•1pc Thread Tap M8 x 1.0.
•1pc Core Drill Ø5.5 for No. 12 x 28 UNF thread.
•1pc Thread Tap No. 12 x 28 UNF.
•1pc Adapter for power drill.
•1pc Specail Drill Ø 2.6.
•1pc Cleaning Brush 5.3mm x 100mm, Overall Length: 300mm.
•1pc Cleaning Brush 9.0mm x 100mm, Overall Length: 300mm.
•1pc Cleaning Brush 10.0mm x 100mm, Overall Length: 300mm.
•2pcs Special Drill Stand.
•2pcs Tie Bolt M8 x 1.0 (180mm Long).
•1pc Glow Plug Extractor M8 x 1 (Bearing).
•1pc Puller Guide Bushing.
•1pc Puller Holder M8 x 1.0 thread.
•3pcs Glow Plug Top Remover 2.5, 3.5, 5mm.
•1pc Jaw Driver With T-Handle.
•1pc Drill Guide Bushing Ø 17.5 x 38.
•1pc Drill Guide Bushing Ø 17.5 x 63.
•1pc 1/2” Sq. Drive Adapter 10mm Hex.
 
back to list