Motorcycle Repair Tools
251-4493
Front And Rear Wheel And Chain Service Tool Kit
• This kit provides two chain adjusters, three wheel nut sockets
and three front axle alignment tools for Ducati.
• Chain Adjuster: These tools help you to turn the eccentric hub
that tightens the chain. Material: Stainless 304.
01.): It fits Ducati 748/916/996/998, Hypermotard, Multistrada,
Monster S2R/S4R and all Ducati single sided swing-arm
bikes except the 1098.
02.): It fits 1098/1198/SF/MTS1200 and Diavel.
• Front Axle Alignment Tool: These tools help you to install and
maintain correct alignment of the front axle while the axle nut is
being tightened. Material: aluminum 6061 T6.
01.): It fits Ducati 848, 1098, 1198 and other models that use a
30 mm ID axle.
02.): It fits Ducati 748, 916, 996, 998, 749, 999, ST2, ST3, ST4,
620SS, 800SS, 1000SS and other models that use a 25mm ID axle.
03.): It fits for all Ducati that have Ohlins forks and a 25mm inside
diameter axle. It also firs the Hypermotard.
Note: The 427-02 tool has a pin that is longer than another; the longer pin
must be aligned to engage with the notch in the right hand fork leg.
• Front and Rear Wheel Nut Socket
01.): It is two sizes in one, a 55mm 12pt for the rear and a 28mm 6pt for
the front wheel.
02.): 46mm, 6/12pt for the rear wheel.
03.): 41mm, 6/12pt for the rear wheel.
All sockets with 1/2＂ drive. Material: 7075-T6 aluminum with black anodizing.
• This kit provides two chain adjusters, three wheel nut sockets
and three front axle alignment tools for Ducati.
• Chain Adjuster: These tools help you to turn the eccentric hub
that tightens the chain. Material: Stainless 304.
01.): It fits Ducati 748/916/996/998, Hypermotard, Multistrada,
Monster S2R/S4R and all Ducati single sided swing-arm
bikes except the 1098.
02.): It fits 1098/1198/SF/MTS1200 and Diavel.
• Front Axle Alignment Tool: These tools help you to install and
maintain correct alignment of the front axle while the axle nut is
being tightened. Material: aluminum 6061 T6.
01.): It fits Ducati 848, 1098, 1198 and other models that use a
30 mm ID axle.
02.): It fits Ducati 748, 916, 996, 998, 749, 999, ST2, ST3, ST4,
620SS, 800SS, 1000SS and other models that use a 25mm ID axle.
03.): It fits for all Ducati that have Ohlins forks and a 25mm inside
diameter axle. It also firs the Hypermotard.
Note: The 427-02 tool has a pin that is longer than another; the longer pin
must be aligned to engage with the notch in the right hand fork leg.
• Front and Rear Wheel Nut Socket
01.): It is two sizes in one, a 55mm 12pt for the rear and a 28mm 6pt for
the front wheel.
02.): 46mm, 6/12pt for the rear wheel.
03.): 41mm, 6/12pt for the rear wheel.
All sockets with 1/2＂ drive. Material: 7075-T6 aluminum with black anodizing.
AUTO TOOLS CO., LTD.