PRODUCTS

Battery & Electric System

113-1665

6-24V Mini Circuit Tester

• Check on 6, 12 and 24V systems.
• To establish whether there is an electrical potential at any low voltage point in the system.
• By using the pointed contact tip to pierce insulation on cables, it will also establish if current is present.
• This can be helpful when tracing faults and for BREAKING INTO cable to add to a circuit.
• Needle point probe for easy back probing and piercing.
• Includes screw-in alligator clip for additional versatility.
• When black ground clip is clamped to suitable earth point and contact tip is placed onto testing sample, test bulb will glow if current is present.
• Voltage Range: 6-24V.
• Coil Cord Length: 12-feet                         
• This quality circuit tester has an impact resistant transparent handle, incorporating a test light, 12-feet of heavy duty coil cord and a crocodile (earth) clip.
• The crocodile (earth) clip is clamped to a suitable earth point and the contact tip is placed onto the part to be tested. 
• If current is present, the test light will be glowed.
 

• Check on 6, 12 and 24V systems.
• To establish whether there is an electrical potential at any low voltage point in the system.
• By using the pointed contact tip to pierce insulation on cables, it will also establish if current is present.
• This can be helpful when tracing faults and for BREAKING INTO cable to add to a circuit.
• Needle point probe for easy back probing and piercing.
• Includes screw-in alligator clip for additional versatility.
• When black ground clip is clamped to suitable earth point and contact tip is placed onto testing sample, test bulb will glow if current is present.
• Voltage Range: 6-24V.
• Coil Cord Length: 12-feet                         
• This quality circuit tester has an impact resistant transparent handle, incorporating a test light, 12-feet of heavy duty coil cord and a crocodile (earth) clip.
• The crocodile (earth) clip is clamped to a suitable earth point and the contact tip is placed onto the part to be tested. 
• If current is present, the test light will be glowed.
 

back to list