• Material: Cr-V Steel. Suitable for:---
  Punch & Mandrell 18,2: Supplies usual models from: BMW, Volkswagen.
  Punch & Mandrell 24,0: Supplies usual models from: Opel.
  Punch & Mandrell 26,0: Supplies usual models from: Volkswagen.
  Punch & Mandrell 32,0: Supplies usual models from: BMW.

• The Press-it hole puncher kit is designed for punching holes into bumpers to
  mount parking sensors. The size of the holes are different from vehicle to vehicle.
• Previously the holes were drilled by stepped drill bits.
• The problem is, that the bumper is unusable if the hole is too deep.
• Advantages of the kit: With the different cutters you can switch between hole sizes.
• Thus the holes have the optimal diameter to set the parking sensors.
• The varnish is moved in at the edges and as a result there are no sharp edges.
• Another advantage of the Press-it System is that pressing in the holes is taken
  place after the painting.
• Because the sensitivity of the sensors, they have to be fixed in millimeter precision
  to guarantee a proper function.
• The different mandrels depending on the size of the cutters. With the right cutter a
  custom-fit hole is punched into the bumper.
• By using the mandrels, which are also included in the Press-It kit, the sensors are
  getting assembled in a very precise way.
• Easy and professional punching of holes, according to the requirements of most
  automobile manufacturer.

• Material: Cr-V Steel. Suitable for:---
  Punch & Mandrell 18,2: Supplies usual models from: BMW, Volkswagen.
  Punch & Mandrell 24,0: Supplies usual models from: Opel.
  Punch & Mandrell 26,0: Supplies usual models from: Volkswagen.
  Punch & Mandrell 32,0: Supplies usual models from: BMW.

• The Press-it hole puncher kit is designed for punching holes into bumpers to
  mount parking sensors. The size of the holes are different from vehicle to vehicle.
• Previously the holes were drilled by stepped drill bits.
• The problem is, that the bumper is unusable if the hole is too deep.
• Advantages of the kit: With the different cutters you can switch between hole sizes.
• Thus the holes have the optimal diameter to set the parking sensors.
• The varnish is moved in at the edges and as a result there are no sharp edges.
• Another advantage of the Press-it System is that pressing in the holes is taken
  place after the painting.
• Because the sensitivity of the sensors, they have to be fixed in millimeter precision
  to guarantee a proper function.
• The different mandrels depending on the size of the cutters. With the right cutter a
  custom-fit hole is punched into the bumper.
• By using the mandrels, which are also included in the Press-It kit, the sensors are
  getting assembled in a very precise way.
• Easy and professional punching of holes, according to the requirements of most
  automobile manufacturer.