PRODUCTS

Chassis & Undercar Tools

923-1222

Drive-On Rib Grip Lug-Off Tool Kit

•The drive-on tool is a relatively permanent tool and fits all rib nuts.
•This system is inexpensive because rib-nuts are replaceable at low cost after they have been worm out.
•Insert rib nut into drive-on tool with non-bevelled open end of nut facing in.
•Ribs on nut bite into and grip the lug stud.
•But bevelled open end of nut against end of damaged lug stud.
•Drive rib nut on lug stud by hammering on drive-on tool.
•Remove drive-on tool.
•Place lug wrench over hex head of rib nut and turn to break stud free.
•OK to use impact wrench.
•To get the longest life out of the rib nut:---
 (a.) Hammer the rib nut on the lug stud as straight as you can.
 (b.) Don’t over torque.
 (c.) Check the direction of your torque.
•It should be the reverse of the thread direction because you are taking the lug stud off, not tightening it.


 

•The drive-on tool is a relatively permanent tool and fits all rib nuts.
•This system is inexpensive because rib-nuts are replaceable at low cost after they have been worm out.
•Insert rib nut into drive-on tool with non-bevelled open end of nut facing in.
•Ribs on nut bite into and grip the lug stud.
•But bevelled open end of nut against end of damaged lug stud.
•Drive rib nut on lug stud by hammering on drive-on tool.
•Remove drive-on tool.
•Place lug wrench over hex head of rib nut and turn to break stud free.
•OK to use impact wrench.
•To get the longest life out of the rib nut:---
 (a.) Hammer the rib nut on the lug stud as straight as you can.
 (b.) Don’t over torque.
 (c.) Check the direction of your torque.
•It should be the reverse of the thread direction because you are taking the lug stud off, not tightening it.


 

back to list