PRODUCTS

Chassis & Undercar Tools

921-6326

6” Tail Pipe Cutter

•Lubricate cutting wheels with light machine oil prior to use before storage.
•Turn cutter handle counter-clockwise to extend shaft as needed to fit pipe diameter.
•Use for 3-1/2” to 6” tail pipe.
•Wrap chain around pipe and hook link into tabs on cutter handle.
•Turn cutter handle as needed to ensure chain fits snugly around pipe.
•As cutting progresses, turn cutter handle slightly to maintain snug pressure.
•Take multiple shallow cuts for best results.
•Slowly rotate cutter around piep.
•Do not over tighten.
 

•Lubricate cutting wheels with light machine oil prior to use before storage.
•Turn cutter handle counter-clockwise to extend shaft as needed to fit pipe diameter.
•Use for 3-1/2” to 6” tail pipe.
•Wrap chain around pipe and hook link into tabs on cutter handle.
•Turn cutter handle as needed to ensure chain fits snugly around pipe.
•As cutting progresses, turn cutter handle slightly to maintain snug pressure.
•Take multiple shallow cuts for best results.
•Slowly rotate cutter around piep.
•Do not over tighten.
 

back to list