Chassis & Undercar Tools
122-6033
C.V. Joint Banding Tool With Cutter
•Easily removed, by sliding side-ways after winding has been completed.
•Place band around boot and through nose of tool and through slot in winding body.
•Using a 1/2" socket wrench or by hand wind the band untill sufficient tension is applied.
•Rotate handle over the boot to lock the band.
•Slide tool free-end down with a hammer.
•Easily removed, by sliding side-ways after winding has been completed.
•Place band around boot and through nose of tool and through slot in winding body.
•Using a 1/2" socket wrench or by hand wind the band untill sufficient tension is applied.
•Rotate handle over the boot to lock the band.
•Slide tool free-end down with a hammer.