•Ground anchor pegs must be driven completely into the ground. 

•After fully anchoring goal, clear an area of 50’ radius (min.) arond goal. 

•Apply a horizontal pull force of 242 pounds at the top of the front and center of cross bar for 60 seconds+10-0 seconds, full safety precautions must be taken while performing this test. 

•If ground anchor pegs become dislodged, longer ground anchors pegs must be used. 

•After installing longer ground anchor pegs, recheck goal stability using same procedures as above. 

•If ground anchor pegs become dislodged, alternative anchoring methods must be used.

•Ground anchor pegs must be driven completely into the ground. 

•After fully anchoring goal, clear an area of 50’ radius (min.) arond goal. 

•Apply a horizontal pull force of 242 pounds at the top of the front and center of cross bar for 60 seconds+10-0 seconds, full safety precautions must be taken while performing this test. 

•If ground anchor pegs become dislodged, longer ground anchors pegs must be used. 

•After installing longer ground anchor pegs, recheck goal stability using same procedures as above. 

•If ground anchor pegs become dislodged, alternative anchoring methods must be used.