PRODUCTS

Chassis & Undercar Tools

914-5776

Glow Plug Remover Set

• Design to remove the damaged/broken glow plug from cylinder head.
• Suitable for glow plug with M8 x 1mm or M10 x 1 mm thread.
• The set includes all required adaptors for centering, drilling and pulling
  for the safe removal of the glow plug.

• A.) Puller Housing-1-Hex 12 mm spindle; Hex 30 mm nut; cone center tool.
• B.) Drill Holding Adaptor.
• C.) Puller Adaptor Mandrel (2 pcs/set)- 1/4”-28 UNF; Hex 8 mm × 2 pcs.
• D.) Pilot Drill Centering Sleeve (2 pcs/set)- Φ6 × 3.5 × 40L × 2 pcs.
• E.) Hex Key (3 mm).
• F.) Star Socket (E10)- 9.7 mm square socket.
• G.) Drill Bit (7 mm/5.5 mm).
• H.) Drill Bit (9 mm/5.5 mm).
• I.)  Ratchet T – Bar.
• J.) Pilot Drill (2 pcs/set) - Φ3.5 drill × 2 pcs.
• K.) Tap (M10 x 1.0).
• L.) Tap (M8 x 1.0).
• M.) Tap (1/4”-28UNF).

 

• Design to remove the damaged/broken glow plug from cylinder head.
• Suitable for glow plug with M8 x 1mm or M10 x 1 mm thread.
• The set includes all required adaptors for centering, drilling and pulling
  for the safe removal of the glow plug.

• A.) Puller Housing-1-Hex 12 mm spindle; Hex 30 mm nut; cone center tool.
• B.) Drill Holding Adaptor.
• C.) Puller Adaptor Mandrel (2 pcs/set)- 1/4”-28 UNF; Hex 8 mm × 2 pcs.
• D.) Pilot Drill Centering Sleeve (2 pcs/set)- Φ6 × 3.5 × 40L × 2 pcs.
• E.) Hex Key (3 mm).
• F.) Star Socket (E10)- 9.7 mm square socket.
• G.) Drill Bit (7 mm/5.5 mm).
• H.) Drill Bit (9 mm/5.5 mm).
• I.)  Ratchet T – Bar.
• J.) Pilot Drill (2 pcs/set) - Φ3.5 drill × 2 pcs.
• K.) Tap (M10 x 1.0).
• L.) Tap (M8 x 1.0).
• M.) Tap (1/4”-28UNF).

 

back to list