•1/2" DR. twist socket 19, 21, 22, 24mm and one 1/2” extension driver.

•1/2" DR. twist socket is specially designed for the removal of locking wheel nuts.

•This tool has 6 point and the other side with 6 point twist.

•This tool can be also used while a nut could not be loosen in a normal way because of rust and deformation. 

•This socket set is made of SCM440 with HRC 50~53 degree. 

•Choose an appropriate twist socket with suitable size.

•Put the extension driver on one side of twist socket. 

•If operators would like to operate with the side of 6 point twist, then +need to put the extension drive in the side of 12 point twist; hen operate it on a damaged nut.

•Use a manual wrench to loose the nut anticlockwise. 

•Take the extension drive out from the twist socket.

•Use a round bar to push the nut and take out the nut of the twist socket. 

•If the nut could not be taken out from twist socket, then use a hammer hitting the round bar to take out the nut from twist socket. 

•Note: While operating, be sure to wear protect-glasses to protect eyes from nut fragment.

•1/2" DR. twist socket 19, 21, 22, 24mm and one 1/2” extension driver.

•1/2" DR. twist socket is specially designed for the removal of locking wheel nuts.

•This tool has 6 point and the other side with 6 point twist.

•This tool can be also used while a nut could not be loosen in a normal way because of rust and deformation. 

•This socket set is made of SCM440 with HRC 50~53 degree. 

•Choose an appropriate twist socket with suitable size.

•Put the extension driver on one side of twist socket. 

•If operators would like to operate with the side of 6 point twist, then +need to put the extension drive in the side of 12 point twist; hen operate it on a damaged nut.

•Use a manual wrench to loose the nut anticlockwise. 

•Take the extension drive out from the twist socket.

•Use a round bar to push the nut and take out the nut of the twist socket. 

•If the nut could not be taken out from twist socket, then use a hammer hitting the round bar to take out the nut from twist socket. 

•Note: While operating, be sure to wear protect-glasses to protect eyes from nut fragment.